HP Smart Update Manager 5.1 User Guide

Possible valuesDescriptionParameter
provides full access to any user who has
access to the local console, without
prompting for a user name or password.
access granted to local users. (Applies to
Linux PSP only.)
HP Systems Management Homepage uses
this parameter to set up the trust
TRUSTMODE
• TrustByCert—If you use this value, you
must define the CERTLIST parameter
to enable access to the server.
relationship mode. (Applies to Linux PSP
only.)
• TrustByName—If you use this value, you
must define the XENAMELIST.
• TrustByAll—HP does not recommend
using this value because of possible
negative security consequences.
CAUTION: The accepted values are
case-sensitive and must be capitalized
as shown. Failure to do so prevents the
trust relationship from being set up
properly during installation and might
affect access to the web server.
Certificate file name or Server DNS nameEnables you to provide a list of certificate
files or servers where certificates can be
CERTLIST
obtained for trust relationships for the HP
Systems Management Homepage.
(Applies to Linux PSP only.)
Server DNS nameEnables you to provide a list of servers,
separated by semicolons, for trust
XENAMELIST
relationships for the HP Systems
Management Homepage. (Applies to
Linux PSP only.)
This parameter is valid only if the
TRUSTMODE parameter is set to
TrustByName. (Applies to Linux PSP
only.)
The hp_qla2x00 QLogic Fibre Channel
Driver uses this parameter to determine
HPQLA2X00FO
• SinglePath
• SecurePath
the failover mode to use. (Applies to Linux
PSP only.)
• QLogicFailure
NOTE: No default value
Y, N (default)The hp_qla2x00 QLogic Fibre Channel
Driver uses this parameter to determine
HPQLA2X00FORCE
whether to skip detection of third-party
storage. (Applies to Linux PSP only.)
User can define the OAUID variable
multiple times before each HOST variable.
Provides the user name credentials for the
OA associated with VC. You must define
a value of these variables before the HOST
OAUID
variable in the [TARGETS] section. This
parameter applies only for VC firmware.
You can also use OAUSER or
OAUSERNAME.
User can define OAPWD variable multiple
times before each HOST variable.
Provides the password credentials for the
OA associated with VC. You must define
a value of these variables before the HOST
OAPWD
variable in the [TARGETS] section. This
parameter applies only for VC firmware.
You can also use OAPASSWORD.
50 Using scripts to deploy updates