HP ProLiant DL380p Gen8 Server Maintenance and Service Guide

Removal and replacement procedures 52
6.
Disconnect the SATA cable.
7. Remove the power supply backplane.
To replace the component, reverse the removal procedure.
Hot-plug fan
The server supports variable fan speeds. The fans operate at minimum speed until a temperature change
requires a fan speed increase to cool the server.
The server shuts down in the following temperature-related scenarios:
• At POST:
o The BIOS suspends the server for 5 minutes if it detects a cautionary temperature level. If the
cautionary temperature level is still detected after 5 minutes, the BIOS performs an orderly shutdown
and enters Standby mode.