HP ProLiant Gen8 Server with HP iLO Management Engine Setup Guide

7. Run the Insight Display wizard
When the enclosure is powered up for the first time, the HP BladeSystem Insight Display
launches an installation wizard to guide you through the initial configuration process.
a. Record important information, such as the Onboard Administrator IP address, gathered
while running the installation wizard.
b. Read the Insight Display and write down the IP address for the active and standby
Onboard Administrator (by default, the Onboard Administrator obtains an IP address via
DHCP.) This IP address is needed for remote connection and subsequent setup. If DHCP
is not used, a static IP address can be configured with the Insight Display installation
wizard.
c. The Insight Display verifies that no installation or configuration errors exist and indicates
configuration check progress. If configuration errors are indicated, follow the on-screen
instructions to correct the problem.
When the screen displays No Errors Detected, the hardware installation is complete.
Installing ProLiant BL servers 25