HP ProLiant Gen8 Server with HP iLO Management Engine Setup Guide

Step 2: OS Selection
This screen displays the different operating systems available for installation. Some of the operating
system selections might be unavailable if either the system or the primary controller in the system
does not support the installation of that particular operating system. Select the operating system
you are installing from the choices displayed on this screen.
Figure 7 OS Selection step
1. Select an OS Family
Select an operating system family to install. Each of these operating systems supports different
installation methods and source media types. If the OS you want to install is not listed, check
http://www.hp.com for OS drivers or an update to the HP ProLiant firmware.
NOTE: For more information about OS support, see http://www.hp.com/go/supportos.
The available install method and source media type change depending on the selected OS
family.
2. Select an Install Method
This section provides options for installing an operating system. Different operating systems
support different installation methods, so some options are not always available.
Configure and install 35