Quick Deploy Rail System Installation Instructions (2U ball bearing and CMA) Copied

Quick Deploy Rail System
Installation Instructions
Hardware kit contents
WARNING: To reduce the risk of personal injury or damage to the
equipment, at least two people are required to lift the server during
installation or removal.
IMPORTANT: When installing the rack rails, be sure they are oriented
Front Left and Front Right, as indicated on the rails.
Item
Hardware (Scale: 1:1) Quantity/Tool
A
4/ Slotted T-25 Torx
B
4
Y User provided You must provide the
Not following:
shown • Screwstosecure 
the slide mounting
bracket assemblies
in a threaded-hole
rack
  • Cagenutsfora 
round-hole rack
In addition to the supplied items, you might need:
• Screwsthattathreaded-holerack
• The appropriate screwdriver for the screws
• Kit 371482-B21 for integrated shipping in a round-hole rack
• An optional installation tool (695539-001). This tool is available for assistance
in installing the server into the rack. Refer to the tool part number when
contacting your local service representative.
Overview
This rack hardware kit supports a variety of products in round-, square-, or
threaded-hole racks. Use the legend to identify installation steps appropriate to the
type of rack.
IMPORTANT: If you are shipping the server installed in a rack, see the
additional instructions located in “Preparing the product for integrated
shipping in a rack” before proceeding.
Part Number: 670384-004
June 2012
Edition: 4
*670384-004*
670384-004
©Copyright2011,2012Hewlett-PackardDevelopmentCompany,L.P.
The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Rackidenticationlegend
Round-hole racks Square-hole racks Threaded-hole racks
No tools required No tools required —
Installing the rail kit into a rack
WARNING: To avoid risk of personal injury or damage to the equipment,
do not stack anything on top of rail-mounted equipment or use it as a
work surface when extended from the rack.
CAUTION: Always plan the rack installation so that the heaviest item is
on
thebottomoftherack.Installtheheaviestitemrst,andcontinueto
populate the rack from the bottom to the top.
WARNING: To reduce the risk of personal injury or damage to the
equipment:
•Be
surethattherackisadequatelystabilizedbeforeinstallingtheserver.
•Atleasttwopeoplearerequiredtolifttheserverduringinstallationor 
removal.
IMPORTANT: To ensure proper installation, install the server into rack rail
slots
1rst.
Removing the rail (optional)