HP Insight Diagnostics 9.0 User Guide
Table Of Contents
- User Guide
- Contents
- 1 HP Insight Diagnostics overview
- 2 Getting started
- Installing the Online Edition
- Starting the Online Edition
- Starting HP Insight Diagnostics for Windows Online Edition
- Starting HP Insight Diagnostics for Linux Online Edition from the HP System Management Homepage
- Starting the Online Edition from a browser
- Modifying browser settings on a Linux server
- Starting the Online Edition from Microsoft Internet Explorer
- Starting the Online Edition from Firefox
- Using the Online Edition from a command line
- Using HP Insight Diagnostics commands in Linux
- Using HP Insight Diagnostics commands in Windows
- Starting the Offline Edition
- 3 Using HP Insight Diagnostics
- 4 Troubleshooting
- Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Registering for software technical support and update service
- HP authorized resellers
- Documentation feedback
- New and changed information in this edition
- Related information
- Related documentation
- HP websites
- HP Support Center
- Support and drivers
- Typographic conventions
- A Acronyms and abbreviations
- Index
Figure 8 Diagnose tab
If the computer does not have any logical volumes or power supplies that are diagnosable, the
following message appears:
System does not have any diagnosable devices installed.
Using the Test tab (HP Insight Diagnostics Offline Edition only)
IMPORTANT: This feature is available only in HP Insight Diagnostics Offline Edition.
The offline HP Insight Diagnostics Test feature provides options for diagnostic testing of all major
hardware components in the system. Three tests are available on the Test tab:
• Quick Test runs a predetermined test script for which a sample of each hardware component
is exercised and requires no user intervention.
• Complete Test runs a predetermined script for which each hardware component is tested fully.
• Custom Test runs only the tests selected. This test is the most flexible option, with selections for
specifying devices, tests, and test parameters.
Running a Quick Test
1. Click Quick Test.
2. Select the test mode:
• Interactive runs all tests, some of which require user input.
• Unattended runs the tests that do not require user input.
3. Select the test duration:
• Loops runs the test for the specified number of test cycles.
• Total Test Time (minutes) runs the test for the specified length of time.
4. Select Stop on First Error to stop all tests if an error occurs.
20 Using HP Insight Diagnostics