HP Insight Diagnostics 9.0 User Guide
Table Of Contents
- User Guide
- Contents
- 1 HP Insight Diagnostics overview
- 2 Getting started
- Installing the Online Edition
- Starting the Online Edition
- Starting HP Insight Diagnostics for Windows Online Edition
- Starting HP Insight Diagnostics for Linux Online Edition from the HP System Management Homepage
- Starting the Online Edition from a browser
- Modifying browser settings on a Linux server
- Starting the Online Edition from Microsoft Internet Explorer
- Starting the Online Edition from Firefox
- Using the Online Edition from a command line
- Using HP Insight Diagnostics commands in Linux
- Using HP Insight Diagnostics commands in Windows
- Starting the Offline Edition
- 3 Using HP Insight Diagnostics
- 4 Troubleshooting
- Support and other resources
- Information to collect before contacting HP
- How to contact HP
- Registering for software technical support and update service
- HP authorized resellers
- Documentation feedback
- New and changed information in this edition
- Related information
- Related documentation
- HP websites
- HP Support Center
- Support and drivers
- Typographic conventions
- A Acronyms and abbreviations
- Index
Click Identify Drive to identify the specific hard drive in the computer that may contain the volume.
The hard drive LED indicates the location of the volume as follows:
• A SCSI hard drive containing the logical volume flashes the hard drive LED.
• A SATA or SAS hard drive containing the logical volume illuminates a blue hard drive LED.
Figure 12 Test status
Viewing offline test status
The progress and status of offline quick, complete, or custom testing appears on the Status tab as
follows:
• Device displays the specific device being tested.
• Test displays the specific test running.
• Status displays the test results as follows:
Canceled: The test did not complete or was canceled.◦
◦ Passed: The test passed, and the device is operating within specifications.
◦ Failed: The device failed the test, or the test itself failed. A failure indicates that additional
testing should be performed on the device.
◦ Further Troubleshooting Required: A communication problem exists that could be related
to the health of the device. Perform additional troubleshooting procedures to determine
the problem or use the Custom test option on the Test tab to retest the device.
◦ Abnormal termination: The test terminated abnormally.
• Test Progress displays the progress of the testing.
• Time displays the time elapsed for the specific test.
To cancel the test in progress, click Cancel.
To repeat the testing, click Retest.
To view all test failure information, view the Error Log on the Log tab.
24 Using HP Insight Diagnostics