HP Intelligent Provisioning User Guide

◦ Enabled–Every 3rd Failure—A failed login log entry is recorded after every third failed

◦ Enabled–Every 5th Failure—A failed login log entry is recorded after every fifth failed

◦ Disabled—No failed login log entry is recorded.

Various iLO access settings can be edited from the three tabs on the Access Settings window:

Access Options, Service and IPMI/DCMI.

To edit access settings on the Access Options tab:

1. In the iLO Configuration Utility window, click Access Settings.

The Access Options tab data appears:

2. Edit the option(s) as necessary. Click Apply.

Access Settings–Service

• Secure Shell (SSH) Access—Enables you to specify whether the SSH feature on iLO is enabled

or disabled. SSH provides encrypted access to the iLO CLP. The default is Enabled.

• Secure Shell (SSH) Port—Default is 22

• Remote Console Port—Default is 17990

• Web Server Non-SSL Port (HTTP)—Default is 80

• Web Server SSL Port (HTTPS) —Default is 443

• Virtual Media Port—Default is 17988

• SNMP Access—Specifies whether iLO should respond to external SNMP requests. The default

setting is Enabled. If you set SNMP Access to Disabled, the iLO Management Engine continues

to operate, and the information displayed in the iLO web interface is updated, but no alerts

are generated and SNMP access is not permitted. When SNMP Access is set to Disabled,

most of the boxes on the Administration → Management → SNMP Settings page are

unavailable and will not accept input.

54 Using Intelligent Provisioning