Compaq Parallel Database Cluster Model PDC/O1000 for Oracle8i and Windows 2000 Administrator Guide

Installation and Configuration 5-7
Compaq Confidential – Need to Know Required
Writer: Carol Tatick Project: Compaq Parallel Database Cluster Model PDC/O1000 for Oracle8i and Windows 2000 Administrator Guide Comments:
Part Number: 225083-002 File Name: f-ch5 Installation and Configuration.doc Last Saved On: 6/11/01 12:06 PM
Ethernet Cluster Interconnect Adapters
For a non-redundant Ethernet cluster interconnect, install one single-port or
dual-port Ethernet adapter into each cluster node. For a redundant Ethernet
cluster interconnect, install two single-port or two dual-port Ethernet adapters
into each cluster node.
For recommended dual-port and single-port Ethernet adapters, see the
Compaq Parallel Database Cluster Model PDC/O1000 Certification Matrix
for Windows 2000 at
www.compaq.com/solutions/enterprise/ha-pdc.html
If you need specific instructions on how to install an Ethernet adapter, refer to
the documentation of the Ethernet adapter you are installing or refer to the user
guide of the ProLiant server you are using.
Refer to the section “Cabling the Ethernet Cluster Interconnect” for more
information about building an Ethernet cluster interconnect.
Installing the Client LAN Adapters
Unlike other clustering solutions, the PDC/O1000 does not allow transmission
of intra-cluster communication across the client LAN. All such
communication must be sent over the cluster interconnect.
Install a NIC into each cluster node for the client LAN. Configuration of the
client LAN is defined by site requirements. To avoid a single point of failure
in the cluster, install a redundant client LAN.
If you need specific instructions on how to install an adapter, refer to the
documentation for the adapter you are installing or refer to the user guide of
the ProLiant server you are using.