HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide

Configuring Array Controllers
If an array controller has been purchased with the server, run the Array Configuration
Utility XE (ACU-XE) to set up the remaining physical drives for use.
IMPORTANT: Internet Explorer is required to run ACU-XE. Internet Explorer is used to
interface with the array controller.
The utility can be run online using the following steps:
1. Click Start>Programs>Compaq System Tools>Compaq Array
Configuration Utility XE.
2. Select if you want to enable remote administration when prompted, then
click OK.
3. Enter your Web Management password when prompted.
4. Configure the remaining physical drives into logical drives, and run Disk
Administrator to partition and format the additional drive space.
For more information on using ACU-XE, refer to the online help at
http://h18004.www1.hp.com/products/servers/proliantstorage/
software-management/acumatrix/index.html.
HP Factory-Installed Operating System Software for Microsoft Windows 2000 Server User Guide 21
HP CONFIDENTIAL
Writer: Michele Richardson File Name: 280154-007.doc
Codename: CTO Part Number: 280154-007 Last Saved On: 10/7/03 2:48 PM