DL980 G7 Sys Errata: Processor Upgrade

CAUTION: Do not power off or power down the server until the firmware for all
components in this procedure have been updated.
g. Click "Restart Later."
10. Flash the CPLD using the CPLD Smart Component.
NOTE: When updating the individual components, the Smart Components will detect if the
component is already at the correct revision by displaying the message pictured below. For
components other than is CPLD, you can select "Close" and continue with the rest of the
firmware update process. For the CPLD, you must select "install" and update the CPLD.
TIP: The estimated time for this update is 10 – 15 minutes.
a. Download the Smart Component to a directory on the hard drive and change to that
directory.
1. Download the CPLD firmware for Windows at ftp://ftp.hp.com/pub/softlib2/
software1/sc-windows-fw/p350928355/v68911
2. Download the CPLD firmware for Linux at ftp://ftp.hp.com/pub/softlib2/software1/
sc-linux-fw/p290132142/v68931
b. From that drive and directory, execute the downloaded file. Linux users can execute "sh
CPxxxxxx.scexe" where CPxxxxxx.scexe represents the filename of the component. Click
"Install" when prompted.
c. If the first update pass fails, retry flashing the CPLD.
d. If the second update pass fails, browse to the iLO web information Diagnostics tab, and
use the Reset button to reset iLO.
Flashing firmware using Smart Components 7