Manualshelf

Step-By-Step Guide: Configuring Hyper-V and Failover Clustering for Windows Server 2008 R2 on the HP ProLiant DL980, rev 1

ManualsBrandsHP ManualsServerHP ProLiant DL980 G7 E7-4870 2.4GHz 10 Core 4p Server
11121314151617181920
17
Step 6B: To add a disk to the cluster shared volume:
1. In the Failover Cluster Manager snap-in, if the cluster that you want to configure is not
displayed, in the console tree, right-click Failover Cluster Manager, click Manage a
Cluster, and then select or specify the cluster that you want.
2. If the console tree is collapsed, expand the tree under the cluster that you want to add a disk to
the Cluster Shared Volumes.
3. Click Cluster Shared Volumes.
4. Under Actions (on the right), click Add storage.
5. In Add Storage, select from the list of available disks, and click OK. The disk or disks you
selected appear in the Results pane for Cluster Shared Volumes.