Step-By-Step Guide: Configuring Hyper-V and Failover Clustering for Windows Server 2008 R2 on the HP ProLiant DL980, rev 1

20
3. On the Specify Name and Location page, specify a name for the virtual machine, such as
VM1. Click Store the virtual machine in a different location, and then type the full path
or click Browse and navigate to the Cluster Shared Volume folder.
4. On the Memory page, specify the amount of memory required for the operating system that will
run on this virtual machine. For example, specify 1024 MB to run Windows Server 2008 R2. The
memory will be static by default when you create a new virtual machine. You may change this to
dynamic afterwards.
5. On the Networking page, connect the network adapter to the virtual network that is associated
with the physical network adapter.
6. On the Connect Virtual Hard Disk page, click Create a virtual hard disk. If you want to
change the name, type a new name for the virtual hard disk. Click Next.