Manualshelf

Step-By-Step Guide: Configuring Hyper-V and Failover Clustering for Windows Server 2008 R2 on the HP ProLiant DL980, rev 1

ManualsBrandsHP ManualsServerHP ProLiant DL980 G7 E7-4870 2.4GHz 10 Core 4p Server
21222324252627282930
23
1. Open Hyper-V Manager. Click Start, point to Administrative Tools, and then click Hyper-
V Manager.
2. Right-click the virtual machine and select Settings.
3. Select Memory from the virtual hardware list on the left.
4. In the settings panel, select Dynamic and specify the startup and maximum RAM for the virtual
machine. (Note: Dynamic Memory support is only available in SP1 and forward.)
5. Select Processor from the virtual hardware list on the left.
6. In the settings panel, select the number of logical processors desired.