Step-By-Step Guide: Configuring Hyper-V and Failover Clustering for Windows Server 2008 R2 on the HP ProLiant DL980, rev 1

24
7. To add additional networks for the virtual machine, select Add Hardware.
8. An additional network adapter will appear in the hardware list on the left. If you are using the
existing virtual network, check Enable virtual LAN identification if necessary. As an
alternative, you may create a new virtual switch using Hyper-V Virtual Network Manager
as shown in “Step 3: Creating a Virtual Network” (on page 11).
9. Click OK to apply settings.
Step 9: Install the Guest Operating System on the Virtual Machine
In this step, you install Windows Server 2008 or any other supported OS on the virtual machine that you
created in Step 7 (on page 19). Then, you install the integration services, which improve performance
and integration with the physical computer.