Step-By-Step Guide: Configuring Hyper-V and Failover Clustering for Windows Server 2008 R2 on the HP ProLiant DL980, rev 1

For More Information
For an overview of the HP ProLiant DL980 G7 server:
http://www.hp.com/servers/dl980
For more information about the HP DL980 G7 server with HP PREMA Architecture:
http://h10010.www1.hp.com/wwpc/us/en/sm/WF25a/15351-15351-3328412-241644-4222584-
4231377.html
To download any recommended HP components described in this document, along with other drivers and
software, visit the HP DL980 G7 Support web page:
http://www.hp.com/support/dl980g7
For a complete library of all documentation supporting the DL980 G7 server:
http://www.hp.com/go/proliant_servers-docs (click on the link, “HP ProLiant DL980 G7 Server series”)
For information about requirements for using Hyper-V with Cluster Shared Volumes, see
Hyper-V: Using
Live Migration with Cluster Shared Volumes in Windows Server 2008 R2
(http://go.microsoft.com/fwlink/?LinkId=164729)
Documentation Feedback
HP welcomes your feedback. To make comments and suggestions about product documentation, send a
message to: [e-mail]. Include the document title, part number, version number, and URL
when submitting your feedback. All submissions become the property of HP.
© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
Intel and Xeon are U.S. trademarks of Intel Corporation.
Microsoft and Windows are U.S. trademarks of Microsoft Corporation.
4AA4-0602ENW, Created March 2012