Step-By-Step Guide: Configuring Hyper-V and Failover Clustering for Windows Server 2008 R2 on the HP ProLiant DL980, rev 1

9
3. On the Select Server Roles page, click Hyper-V.
4. On the Create Virtual Networks page, if the network adapters’ names are identical on both
physical computers, select a physical adapter to create a virtual network that provides access to
the physical network.
Note
If the network adapters are not identical, do not create a virtual
network at this time. You can create the virtual network later by
following the instructions in “Step 3: Create a Virtual Network.” (on
page 11
).