Waste from Electric and Electronic Equipment (WEEE) Disassembly Instructions for HP ProLiant 785 G5, DL785 G6, and DL980 G7 Servers

1 Product End-of-Life Disassembly Instructions
The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of this product to remove components and materials requiring
selective treatment.
Models and Descriptions
This document provides disassembly instructions for the servers listed in Table 1.
Table 1 Servers Supported
DescriptionMarketing Name/Model
Four or eight socket serverHP ProLiant DL785 Generation 5 and 6 Servers
Four or eight socket serverHP ProLiant DL980 Generation 7 Server
Items Requiring Selective Treatment
This section provides information on what items in the server are classified as requiring selective
treatment.
Table 2 lists the classified items requiring selective treatment for the HP ProLiant DL785 Generation
5 Server.
Table 2 HP ProLiant DL785 Generation 5 and 6 Servers Classified Items Requiring Selective Treatment
Model HP ProLiant DL980 Generation 7 Server
Qty. of Items
Included in ProductNotesItem Description
Up to 17Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
• Processor memory board (8)
• Midplane board (1)
• I/O backplane (1)
• SAS backplane (2)
• Power supply backplane (1)
• Media board (1)
• System Insight Display board (1)
• SHUV board (1)
• SPI board (1)
Up to fiveBatteries
• System battery (1)
• BBWC (4)
ZeroMercury containing components
ZeroLiquid Crystal Displays (LCD) with a surface greater
than 100 square cm
ZeroCathode Ray Tubes (CRT)
ZeroCapacitors / condensers (Containing PCB / PCT)
ZeroElectrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
One
• Power cable (1)
External electrical cables and cords
ZeroGas Discharge Lamps
Models and Descriptions 3