HP ProLiant DL980 Generation 7 Servers Read this First Firmware Update Required

HP ProLiant DL980 Generation 7 Servers
Read this First
Firmware Update Required
*AM426-9905A*
HP Part Number: AM426-9905A
Published: 6/10/2011
Edition: 1
A firmware update is required when upgrading to Intel® Xeon® E7 Family processors or when
replacing a SPI board, main I/O board, upper CPU board, lower CPU board or XNC assembly
with a new part. These procedures can be found in the Maintenance and Service Guide, which
can be located on the web at: http://www.hp.com/go/proliant_servers-docs
For HP technical support:
• In the United States, for contact options see the Contact HP United States webpage (http://
welcome. hp.com/country/us/en/contact_us.html). To contact HP by phone:
◦ Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7
days a week. For continuous quality improvement, calls may be recorded or monitored.
◦ If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more
information about Care Packs, refer to the HP website (http://www.hp.com/hps).
• In other locations, see the Contact HP worldwide (in English) webpage (http://
welcome.hp.com/ country/us/en/wwcontact.html).
3
© Copyright 2011 Hewlett-Packard Development Company, L.P.
Printed in the US
Intel, Itanium, Pentium, Intel Inside, Xeon and the Intel Inside logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the United States and other countries.