HP MicroServer Remote Access Card User Manual
11
1. Power on the server by pressing the Power on/Off button on the front panel
2. When POST prompts the message “press F10 for Rom-based setup Utility”, press the F10 key, the
main screen of the BIOS Setup Utility appears
3. Press the right arrow (→) k e y to n a vi g a te to th e “Advanced” menu.
4. Press the down arrow (↓) key to scroll to “IPMI Configuration”. Press the “Enter” key.
5. Press the down arrow (↓) key to scroll the “Set LAN Configuration” menu. Press the “Enter” key.