HP ProLiant Storage Server release notes (5697-7750, November 2008)

Data Protector Express
Workaround
Manually create
another iSCSI virtual hard disk and make it accessible to the
Exchange serve
r:
1. Use the Exchange Management Console to move the storage group path for
the log files an
dsystemfiles to the new volume, leaving the database at the
original iSCS
Ivolume.
2. After modifying the paths in Exchange, click Refresh in the ASM user interface
to force a dis
covery.
3. The applica
tion area for log files will now show an alert. Right click on this
area and select Remove from view.
4. Another discovery will be performed and ASM will restore the log file area
into the us
er interface with corrected properties, such as the new location on
the Exchan
ge server.
For backup jobs from ASM to work properly, each database and the log
files/sys
tem files must be on a separate iSCSI volume. For example, if a storage
group contains one mail store an d one public folder store, three iSCSI volumes
should b
e used, one for each database, and one for the log and system files.
Issue:
Perform
ing a “Remove from View ” on a Virtual Library causes the library to appear as a
User-Defined application.
Description
If a virtual library is deleted from Data Protector Express, and then the Remove
from View option is used on th e virtual library in All-in- O ne Storage Manager,
the virtual library is removed from the Data Protection view, but appears in the
User Defined view.
Workaround
1. Use Data Protector Express to stop and then delete the Virtual Library Device.
a. In Data Protector Express, select the Devices icon from the Favorites pane
on the left.
b. Intherightpane,navigateuntilthedesireddeviceisdisplayed.
c. Right-click the Virtual Library device and select Stop .
d. After the device has been stopped, right-click again and select Delete.
2. Delete the storage folder used by Data Protector E xpress to store the b ackup
data. The storage folder path can be found by right-clicking on the virtual
library in All-in-One Storage Manager, selecting Properties,andthenselecting
the Storage tab.
3. Right-click on the virtual library in All-in-One Storage Manager and select
Remove from view.
HP StorageWorks Storage Mirroring
This section describes issues related to HP StorageWorks Storage Mirroring (SW SM), a service required
to run replication on the HP All-in-One Storage M anag er. Note that HP StorageWorks Storage Mirroring
is not installed on HP ProLiant Storage Servers by default. The following issues apply only to HP ProLiant
Storage Servers with SWSM installed and enabled.
Storage Server release notes
11