HP ProLiant Storage Server Release Notes (January 2006)

Storage Server release notes 11
Issue: Error 1935 during MUI Pack installation
Description Installation error 1935 may be reported during the installation of the Microsoft
MUI packs provided in the Service Release. This problem is currently under
investigation.
Workaround Run the Service Release setup again and try installing the desired MUI pack.
Issue: Installation of MUI Packs takes several minutes to complete
Description The Microsoft MUI Language Packs that are provided on the Service Release
DVD can take up to five minutes per package to install completely.
Workaround HP recommends that only the specific language pack necessary on the system
be selected for installation.
Issue: Storage server fails to reboot when KB840141 and Remote Storage Windows
component are both installed
Description The storage server fails to reboot when Microsoft hotfix KB840141 and the
Remote Storage Windows component are both installed on the system. This
problem is currently under investigation.
Workaround Ensure that hotfix KB840141 is not selected for installation during the Service
Release setup if the Remote Storage Windows component is already installed
on the storage server. If hotfix KB840141 is already installed on the storage
server, do not add the Remote Storage Windows component to the system
through the Microsoft Add or Remove Programs applet.
Issue: Windows Update/Automatic Update changes done through the Service Release only
apply for installation user and MUI setting
Description The configuration changes done through the Enable Windows
Update/Automatic Update feature in the Service Release that provide
capability to manually configure Windows Update/Automatic Update on the
storage server remain valid only for the user account that runs the Service
Release. Also, the changes made can get reset once the language settings are
changed from that used during the Service Release installation.
Workaround Run the Enable Windows Update/Automatic Update feature from the Service
Release, using the necessary user account again. As an alternative, the settings
can be performed manually using the steps provided in the file Enabling
Windows Update.pdf in the DOC folder on the Service Release DVD.
Issue: Windows Update/Automatic Update configuration appears disabled when viewed
through NAS Management console
Description After running the Enable Windows Update/Automatic Update feature from the
Service Release, the feature may appear disabled when viewed through the
NAS Management Console Local Computer policy settings.
Workaround To verify that automatic updates can be configured, right-click on My Computer
on the storage server desktop and use the Automatic updates tab in the System
Properties page.
For Windows Update, run the wupdmgr command on the storage server. For
further details on Windows Update and Automatic Updates, and for manually
configuring the services, refer to the Microsoft Software updates on the HP
Proliant Storage Servers link under the documentation section.