ProLiant ML115 Installation Sheet

HP ProLiant ML115 Ser ver
Installation Sheet
Legal notices
Read instructions completely before
beginning installation procedure.
Part number: 439833-001
First edition: December 2006
Configuring the server
1. Connect all peripherals:
• Keyboard
• Mouse
• Monitor
NOTE:
Refer to the HP ProLiant ML115 Server Support
CD contents for additional information and updates not
provided in this installation sheet.
2. Determine the server BIOS version:
a. Power up the server.
b. Press the
Esc key at the HP logo screen, and then press the
Pause key to halt screen movement.
c. Note the server BIOS version.
d. Verify the server BIOS version against the latest BIOS
version listed for this server on the HP website:
http://www.hp.com
e. If you do not have the latest BIOS, update the BIOS now.
Refer to the HP ProLiant ML115 Server Maintenance and
Service Guide
available on the HP website:
http://www.hp.com
Default boot priority
By default, the server searches
for boot devices in the following
order:
1. CD-ROM/DVD-ROM
2. Removable Devices
3.
Hard Drive
4.
Embedded NIC
Identifying server components
Front panel components
1
Optical drive
8 Drive activity indicator
2
Optical drive manual eject hole
9 Front USB 2.0 ports
3
Optical drive eject button
10 Hard drive EMI shield
4
Optical drive activity indicator
11 Hard drive EMI shield screw
5
Half-height common bay
12 Optical drive spare screws
6
Power button
13 Hard drive spare screws
7
Power LED indicator
Rear panel components
1
PSU fan
9 PCI slot covers
2
PS/2 mouse port
10 Kensington lock notch
3
PS/2 keyboard port
11 Power supply outlet
4
VGA port
12 Rear system fan
5
Serial port A
13 Thumbscrew for access panel
6
Rear USB 2.0 ports
14 The pad lock tab
7
LAN port (RJ-45)
15 PCI slot cover lock
8
HP LO100c Remote
Management Card port
System board components
Item Code Description
1 J68
Top: PS/2 mouse port
Bottom: PS/2 keyboard port
2 CNN1
Top: Serial port A
Bottom: VGA port
3 CN8
USB 2.0 port
4 J19
Top: LAN port
Bottom: USB 2.0 port
5
J
10
HP LO100c Remote Mana
g
ement Card slot
6
J
9P
CI-Ex
p
ress x 16 line with x 16 slot
7
J
8P
CI-Ex
p
ress x 8 line with x 8 slot
Item Code Description
8 U63
ServerEn
g
ines Chi
p
9
J
5 SMC
FW
10
J
6, J7
32-bit/33-MHz 3.3V PCI bus slot
11 BT1
Batter
y
12 U7
MCP55S
p
ro
13 USB_H1
Front USB connector
14 P5
Front
p
anel connector
15 BZ1
Internal buzzer
16 P29
External LED connector
17 SATA1-4
SATA 1-4 connector
18 IDE
IDE channel
19
J
3 Internal
USB connector
20
J
4
Internal USB connector for Ta
p
e
21
J
16
24-
p
in ATX s
y
stem board
p
ower connector
22 U37
S
y
stem BIOS
23 DIMM1-4
DDRII slots
24 U1
AMD AM2 socket
25 U54 LAN chip
26 CPU_FAN 4-pin CPU fan connector
27 PWR2
4-pin ATX CPU power connector
28 SYS_FAN1 4-pin system fan conne
ctor (rear)
Opening the server
The access panel and the front bezel
are both detachable. You need
to remove these system covers before you can remove or replace a
server component.
Removing the access panel