ProLiant ML150 Generation 3 Server Installation Sheet

Configuring the server
1. Connect all peripherals:
• Keyboard
• Mouse
• Monitor
• UPS
NOTE: Refer to the HP ProLiant ML150 Generation 3 Server
Support CD. Use the CD for updated information about the server
and as a reference for any additional information not provided in
this installation sheet.
2. Determine the server BIOS version:
a. Power up the server.
b. Press the Esc key at the HP logo screen.
c. Note the server BIOS version during the POST boot-up.
d. Verify the server BIOS version against the latest BIOS version listed
for this server on the HP website:
http://www.hp.com
e. If you do not have the latest BIOS, update the BIOS now.
Refer to the HP ProLiant ML150 Generation 3 Server Maintenance
and Service Guide available on the HP website:
http://www.hp.com
Default boot priority
By default, the server searches for boot devices in the following order:
1. CD-ROM drive
2. Removable devices
3. Hard drive
4. Network boot
Identifying server components
Front panel components
1 CD-ROM drive 6 Drive activity indicator
2 CD-ROM drive activity indicator 7 Power indicator
3 CD-ROM drive eject button 8 EMI shield
4 Front bezel lock 9 USB port
5 Power button 10 Hard disk drive (HDD) cage
HP ProLiant ML150
Generation 3 Server
Installation Sheet
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Intel, Pentium, and Celeron are trademarks or registered trademarks of Intel
Corporation or its subsidiaries in the United States and other countries.
Part number: 404096-004
November 2006 (Fourth edition)
Rear panel components
1 PS/2 mouse port (green) 9 HP LO100c management card port
2 PS/2 keyboard port (purple) 10 Power supply cable socket
3 Serial port 11 Kensington lock
4 VGA port 12 Rear System fan
5 USB 2.0 port 13 Thumbscrew for access panel
6 LAN port (RJ-45) 14 Key for front panel
7 HP LO100c management card 15 Side panel lock
slot cover
8 PCI slot covers
System board components
Item Code Description
1 XMM4 DIMM slot 4
2 XMM3 DIMM slot 3
3 XMM2 DIMM slot 2
4 XMM1 DIMM slot 1
5 P6 4-pin power connector
6 CR1 5V aux power indicator
7 P7 24-pin power connector
8 P8 4-pin CPU0 fan connector
9 XU2 Processor0 socket
10 XU1 Processor1 socket
11 P24 8-pin power connector
12 P22 4-pin CPU1 fan connector
13 CR2 CPU 1 System Error Indicator
CR3 CPU 2 System Error indicator
14 P25 IDE channel
15 J32 Internal USB 2.0 port
16 P21 4-pin front system fan header
17 P23 External LED connector
18 XBT1 Battery
19 CR4 3.3V aux power indicator
CR5 3.3V power indicator
Item Code Description
20 P20 Front USB 2.0 cable header
21 P10 18-pin front panel I/O connector
22 SW2 CMOS reset button
23 U32 Intel ICH ESB2 chip
24 P11 Password jumper
25 J15 PCI slot 4(64-bit PCI-X)
26 J14 PCI slot 3(64-bit PCI-X)
27 J13 PCI slot 2(64-bit PCI-X)
28 J12 PCI slot 1(32-bit PCI)
29 J38 System BIOS
30 J10 PCI slot 5(PCI-E x8)
31 J 11 PCI slot 6(PCI-E x4)
32 J9 HP LO100c management card slot
33 U4 Broadcom GbE LAN chipset
34 U22 Intel MCH Blackford VS chip
35 U14 Server Engines Pilot chip
36 P1B VGA Port (blue)
37 P1A Serial Port (teal)
38 J4 Server management control firmware
39 P4 4-pin rear system fan header
Accessing internal components
Removing the access panel
Removing the front bezel
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.