HP ProLiant ML310 G3 Storage Server Administration Guide (WSS R2 version, March 2006)

• TheNICsmustbeonthesamenetwork.
• The NICs must be DHC P enabled and the DNS server address must be left blank.
NOTE:
The teaming utility becomes unstable if static IP addresses, subnets, and DNS a ddresses are set
before teaming.
• Duplex and speed settings must be set to use the default values.
To team the NICs:
1. Open the H P Network Teaming utility.
The Network Teaming and Con figuration Properties dialog box is displayed. The type of NIC
andtheslotandportusedisshown.
Figure 53 HP N et work Teaming Properties dialog box
2. Highlight the NICs to team.
3. Click Team.
HP ProLiant ML310 G3 Storage Server administration guide
125