HP ProLiant ML310 G3 Storage Server Installation Guide (WSS R2 version, March 2006)

Table 3 Installation and Configurati on checklist
Steps
Reference
1. Unpack server, check kit
contents, and become familiar
with front and back panels of
storage server. Locate and
write down serial number of
storage server.
See "Checking kit
contents"onpage21.
2. Complete rail installation
instructions.
See the HP ProLiant rail
installation instructions, if
applicable.
3. Connect cables; (optional)
connect a keyboard, mouse,
and monitor; power on server,
and log in to the ser ver.
See "Cabling the
server"onpage25,
Powering on the server,and
Direct attach method.
4. Access the HP Storage
Server Management console.
• Direct attach method
• Remote browse method
• Remote desktop method
• iLO 2 method
See "Accessing
the HP Storage
Server Management
console"onpage29.
5. Complete the storage server
configuration worksheet.
See "Server configuration
worksheet" on page 37.
6. Run Rapid Startup Wizard. See "Rapid Startup
Wizard"onpage40.
7. C o m p l e t e s y s t e m
configuration.
See "Complete system
configuration" on page 41.
8. Configure storage server
for Web access, if necessary.
See "Configuring storage
server for Web access
(optional)" on page 43.
HPProLiantML310G3StorageServerinstallationguide
19