HP ProLiant ML310 G3 Storage Server Installation Guide (WSS R2 version, March 2006)

Powering on the server
Power on the server after connecting the cables.
1. PoweronserverbypushingtheI/Obutton(1). ThepowerLED(2)
illuminate.
HP ProLiant ML310
1
2
5060
Figure 6 Power on bu tton
2. Insert the HP ProLiant Storage Server System Installation and Recovery
DVD into the storage server disk drive to finalize the operating system
installation and updates.
IMPORTAN T:
To successfully complete the installati on and update
process, you must run the HP ProLiant Storage Server
System Installation and Recovery DVD. If you have not
inserted this DVD into the disk drive when you boot the
server, you will be prompted to do so. Follow the steps
below to complete the server installation.
3. If the following screen comes up on your PC, click Exit and reboot or
hold the p ower I/O button for 10 seconds.
26
Installing the server