HP ProLiant ML310 G3 Storage Server Installation Guide (WSS R2 version, March 2006)

3 Accessing the HP Storage
Ser ver Management console
Before accessing the HP Storage Server Management console, verify that
the storage server is c ompletely installed in the rack, and that all cables
and cords are connected.
To access the HP Storage Server Management console, you can use these
access methods:
Direct attach To connect directly to the storage server
without using the net work.
Remote browser To establish a browser-based
connection to the HP ProLiant Storage
Server Management console from a
remote client running Internet Explorer
5.5 (or later).
Remote desktop To establish a connection from a remote
client without using a browser. This
method requires the client to have
Windows remote desktop capability.
HP Integrated Lights-Out
(iLO )
To establish a browser-based
connection from a remote client using
the iLO interface. iLO connectivity is
only supported on the following servers:
ML310 G3, DL380 G4, and DL585.
For more information, see " Planning for installation"onpage15.
IMPORTANT:
An IP address can be substituted for a storage server’s serial number
when using either remote browser or remote desktop methods to access
the HP Storage Server Management console.
Using the Direct attach method
You can access the HP Storage Server Management console using a
monitor, mouse, and keyboard directly attached to the storage server.
HPProLiantML310G3StorageServerinstallationguide
29