HP ProLiant ML310 G3 Storage Server Installation Guide (WSS R2 version, March 2006)

To connect the storage server to a network using the direct attach method

1. Log in to the HP ProLiant Storage Server Management console with the

default user name administrator and the password hpinvent.

NOTE:

You can change the administrator name and password

when you conﬁgure the server using the "Rapid Startup

Wiz ard" on page 40.

2. To complete network conﬁguration using the Rapid Startup Wiz ard,

see "Conﬁguring the server on the network"onpage37.

Using the Remote browser method

The storage server ships with DHCP enabled on the network port. If the

sever is placed on a DHCP-enabled network and the serial number of

the device is known, the server can be accessed through a client running

Internet Explorer 5.5 (or later) on that network, using the TC P/IP 3202 port.

IMPORTAN T:

Before you begin this procedure, ensure that you have the following:

• Windows-based PC loaded with Internet Explorer 5.5 (or later) on

the same local network as the storage server

• DHCP-enabled network

• Serial number or IP address of the storage server

To connect the server to a net work using the remote browser method, you

must ﬁrst e nsure that the client is conﬁguredtodownloadsignedActiveX

controls.

To enable Ac tiveX controls

1. On the remote client machine, open the Internet Explorer web browser

and select Tools>InternetOptions>Security.

Accessing the HP Storage Server Management console