HP ProLiant ML310e Gen8 v2 Server Maintenance and Service Guide

Removal and replacement procedures 52
4.
Remove the access panel ("Access panel" on page 28).
5. Remove the EMI shield from the lower media bay.
6. Remove the optical drive from the upper media bay.
7. Disconnect the power supply cables from the drive cage and the system board.
8. Remove the RPS backplane module.
To replace the component, reverse the removal procedure.
RPS cage
To remove the component:
1. Power down the server (on page 27).
2. Remove all power:
a. Disconnect each power cord from the power source.