HP ProLiant Support Pack 9.10 User Guide

Possible valuesDescriptionParameter
YES, NOThis is a filter switch that allows you to view
only the software components required for
installation.
SOFTWAREONLY
Do not use the /softwareonly parameter
with the /romonly parameter.
YES, NOEnables the credentials of the local host to
be used as the credentials to access the
USECURRENTCREDENTIAL
targets instead of providing the user name
and password explicitly for each target.
The assumption is that the current credentials
are valid for the targets that are being
accessed. (Applies to Windows operating
systems only.)
YES, NOInstructs HP SUM to include the components
from the HP FTP site (ftp://ftp.hp.com) in the
list of possible updates.
WEBUPDATENEEDED
String valueUse a proxy server (and port number) to
access the HP FTP site (ftp://ftp.hp.com).
USEPROXYSERVER
For example, 11.22.33.44:80
Web URL (for example,
autoproxy.com)
Include a proxy script to access the HP FTP
site (ftp://ftp.hp.com).
USEPROXYSCRIPT
YES, NO (default)Instructs HP SUM to delete the input file after
it has been read.
DELETEINPUTFILE
OmitHost (default),
OmitComponent, Force
This parameter instructs HP SUM how to
proceed when a component has a failed
dependency.
ONFAILEDDEPENDENCY
The default of OmitHost causes the host to
be put in a failure state, and no installation
is attempted on it.
OmitComponent clears the affected
components and proceeds with any updates
that do not have dependency failures.
Force attempts all updates, even if they
have dependency failures.
IP address, DNS nameThis parameter is the IP address or the DNS
name of a remote server, remote iLO NIC
HOST
port, Virtual Connect Ethernet or Fibre
Channel Module for c-Class BladeSystem,
or BladeSystem OA.
When two OAs are in an enclosure, this
parameter is the active OA. When
specifying the IP address, you can use either
the IPv4 or IPv6 format.
This parameter specifies an already defined
group name in the HP SUM GUI.
<username>Logs in to the target hosts with your user ID.UID
<password>Uses the password for the user ID specified
in the UID.
PWD
The password is used to log in to target
hosts.
Log file nameRedirects the output from HP SUM or the HP
BladeSystem c-Class OA flash utility to a
different directory than the default location.
LOGFILENAME = "path"
32 Advanced topics