Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

D-4 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: k-appd Troubleshooting.doc Last Saved On: 5/22/01 3:42 PM
4. Restart the server.
5. Check for the following “normal power-up sequence” to verify that your
system meets the minimal hardware requirements and is powered up
under normal operation:
a. The front panel Power On/Standby LED turns green.
b. The fans start up.
c. The monitor displays messages regarding server initialization in the
following sequence:
Video initialization—The Compaq initialization screen is displayed.
Processor initialization
Memory test
Memory initialization
Diskette drive
SCSI devices (if applicable)
ATA devices (if applicable)
Option ROM
d. The operating system loads to complete the boot process.
If the problem persists, continue with the following section, “Diagnosis
Steps.”