Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

LED Indicators, Switches, and Jumpers E-7
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: l-appe LEDs & Switches.doc Last Saved On: 6/19/01 11:16 AM
Network Controller LEDs
The network controller LEDs are located on the back of the server. They
provide the following information:
■ If the server is linked to the network
■ The speed at which the network is being accessed
■ If there is current network activity
Refer to the Compaq Servers Troubleshooting Guide for more information on
troubleshooting network controller problems.
1
2
3
Figure E-3. Network controller LEDs
Table E-3
Network Controller LEDs
Item Description Status Means
Off 10Base-T 10-Mbps (10Base-T Ethernet)Network speed LED
On 100Base-T 100-Mbps (100Base-T Ethernet)
Off No network linkNetwork link LED
On Linked to network
Off No network activityNetwork activity LED
On or flashing Network activity