Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

E-8 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: l-appe LEDs & Switches.doc Last Saved On: 6/19/01 11:16 AM
Switch Settings
The ProLiant ML330 Generation 2 server contains two switchbanks. This
section explains the use of each reserved and nonreserved switch
System Configuration Switch Settings
The system configuration switchbank is located on the system board. Some
switches are reserved for use by Compaq authorized service providers and
must not be changed unless instructed otherwise.
1
2
3
4
5
6
7
8
on
Figure E-4. System configuration switch default settings