Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

2 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: n-index.doc Last Saved On: 5/23/01 11:59 AM
B
backing up server 2-8, 3-2
baffle, fan
removing 3-26
removing, illustrated 3-26
batteries
disposal methods A-6
overview 3-33
recharging A-6
replacing 3-33, A-6
Server Feature Board
location 1-9, 1-10
replacing 3-35
replacing, illustrated 3-35
system board
location 1-7
removing 3-34
removing, illustrated 3-34
replacing 3-33
warnings 3-33, A-6
beeps D-7. See also POST
bezel blanks
removing 3-5
removing, illustrated 3-5
replacing 3-5
BIOS See firmware
blanking panels 2-4
boot order
controllers, configuring 5-4
devices, configuring 5-4
bus clock speed 1-11
bus performance, SCSI 3-9
C
cables
ATA, illustrated 4-10
FCC compliance A-3
SCSI, illustrated 4-3
supported, website 4-1
cabling
ATA devices 4-9
ATA devices, illustrated 4-12
ATAPI tape drive 4-13
caution 4-1
components, illustrated 4-4,
4-11
disconnecting, illustrated 3-10
FCC compliance A-3
overview 4-1
SCSI devices 4-2
SCSI devices, illustrated 4-6
Smart Array Controller 4-7
Smart Array Controller,
illustrated 4-8
tape drive 4-13
website, matrix 4-1
Canadian equipment
regulations A-4
CarePaq D-11
cautions
access panel, removing 3-4,
3-7, 3-21, 3-25, 3-33
cabling 4-1
Compaq System Erase
Utility D-10
defined xi
DIMMs, handling 3-21
DIMMs, installing 3-23
ESD 2-1, 3-1, 3-19, 3-21,
3-25, 3-33, 4-1
factory-installed operating
systems 2-6, F-4
firmware upgrade 5-10
front bezel, removing 3-3,
3-5, 3-7
NVRAM E-9, E-10
power fluctuations 2-2
powering down server 3-2
powering up server 2-6
processor installation 3-26,
3-29
rack ventilation 2-4, 2-5
write cache 6-6