Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

10 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: n-index.doc Last Saved On: 5/23/01 11:59 AM
PCI slots See expansion slots
PME See wake support
port settings 5-3
ports See connectors
POST (Power-On Self-Test)
accessing 5-13
audible error messages D-7
error messages, more
information D-5
F1 prompt 5-6
overview 5-13
sequence D-4
speed up 5-6
troubleshooting D-3, D-5
power
removing 3-2
site requirements 2-2
specifications F-2
troubleshooting D-5
power button
illustrated E-3
locating 1-4
overview E-2
system board connector 1-7
power cord
placement A-8
specifications A-8
power cord connector 1-5
power cycling D-3, D-8
power fluctuations, caution 2-2
power LED
front panel 1-4, E-3
system board E-5
Power On/Standby LED E-3
power supply
connectors, system board 1-7
server features 1-12
powering down server
caution 3-2
instructions 3-2
powering up server
caution 2-6
illustrated 2-7
instructions 2-7
power-on password
network server mode 5-5
Quicklock 5-5
setting 5-5
Power-On Self-Test See POST
powerup sequence, POST D-4
PPM (Processor Power Module)
installing 3-30
installing, illustrated 3-30
LEDs E-5
location 1-7
location, illustrated 3-27
removing 3-32
removing, illustrated 3-32
preboot execution
environment See PXE
preconfigured operating
system See factory-installed
operating system
problems, diagnosing See
troubleshooting
processor socket lever,
illustrated 3-28
processors
corrected failure indication,
setting 5-7
error message C-1
flashing ROM, caution 3-26
installation 3-26
installation, caution 3-29
installation, illustrated 3-28
LEDs E-5, E-6
location 1-7
location, illustrated 3-27
minimum requirements F-3
removing 3-31
removing, illustrated 3-31
server features 1-11
thermal problem C-1
troubleshooting D-6
warranty 1-12
PXE (preboot execution
environment)
enabling 5-3
server features 1-11