Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

1-12 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: b-ch1 Server Features.doc Last Saved On: 6/6/01 8:53 AM
Ports/Connectors
■ Serial (2)
■ Parallel
■ Keyboard
■ Mouse
■ USB (2)
Power Supply
■ CE Mark-compliant PFC power supply
Warranty
The Compaq Pre-Failure Warranty helps prevent unplanned shutdowns of the
system by allowing for the replacement of covered parts before they fail. The
warranty covers processors, memory, and hard drives. Compaq Insight
Manager, included with the system, must be installed for the Compaq
Pre-Failure Warranty to be in effect.
When Compaq Insight Manager alerts you that a component may be eligible
for Pre-Failure Warranty replacement, follow the onscreen instructions or
contact a Compaq authorized service provider in your area. A yellow status
indicator on the Compaq Insight Manager control panel signals that a
component is in a pre-failure condition and should be replaced.
Consult the Compaq Customer Support Center or refer to the Limited
Warranty Statement included with your server for details. Certain restrictions
and exclusions apply. For additional warranty information, visit the Compaq
website at
http://www.compaq.com/support/