Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

3-24 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 5/23/01 3:48 PM
Removing a Memory Module
To remove a DIMM:
1. Follow the steps in “Removing the Access Panel” at the beginning of
this chapter.
2. Press outward on both latches of the DIMM socket at the same time .
This releases the DIMM and pushes it partially out of the socket.
3. Lift the DIMM from the socket .
1
1
2
Figure 3-20. Removing a DIMM