Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

Hardware Options Installation 3-29
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 5/23/01 3:48 PM
8. Secure the heatsink retainer clip on the back of the processor to the
socket, as shown in Figure 3-25.
Figure 3-25. Securing the heatsink retainer clip
9. Secure the assembly clip on the front side of the processor to the
socket
, and then lock the processor into place by pressing down on
the assembly clip lever
.
CAUTION: Applying too much pressure on the assembly clip lever could cause
it to break. Use care when performing this step.
1
2
Figure 3-26. Securing the assembly clip