Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

Cabling Guidelines 4-5
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: e-ch4 Cabling Guidelines.doc Last Saved On: 5/22/01 2:42 PM
68-to-50 pin SCSI Adapter
If installing a device that uses a Fast SCSI-2 interface, you must provide a
68-to-50 pin SCSI adapter (Part Number 199618-001), shown in Figure 4-3.
This adapter should be installed between the 50-pin interface on the device and
the 68-pin SCSI cable connected to the SCSI channel on the Server
Feature Board.
Figure 4-3. 68-to-50 pin (wide-to-narrow) SCSI adapter