Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

5-2 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: f-ch5 Server Configuration and Utilities.doc Last Saved On: 5/22/01 2:41 PM
ROM Based Setup Utility
RBSU performs a wide range of configuration activities, including the
following:
■ Configuring system devices and installed options
■ Viewing system information
■ Selecting the operating system
■ Selecting the primary boot controller
In addition, RBSU includes other features, which are outlined in “Using
RBSU” later in this chapter.
For information on RBSU not found in this guide, refer to the Compaq ROM
Based Setup Utility User Guide found in your documentation pack.
Navigating RBSU
To make selections within RBSU, use the following keys:
■ To access RBSU, press the F9 key during startup when prompted in the
lower right corner of the screen.
■ The arrow keys navigate through the menu system.
■ Selections are made by pressing the Enter key.
■ Selections are cancelled by pressing the Escape key.
■ Selections and changes are saved by pressing the F10 key.