Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

5-8 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: f-ch5 Server Configuration and Utilities.doc Last Saved On: 5/22/01 2:41 PM
Access to Redundant ROM Settings
Use ROMPaq utilities to create a backup ROM image before upgrading the
configuration or to restore saved ROM data.
1. Access RBSU by pressing the F9 key when the prompt displays in the
lower right corner of the screen during power up.
2. Select the Redundant ROM option in the Advanced Options menu of
RBSU.
3. Select one of the ROM banks as the system ROM.
4. Press the Enter key.
5. Press the Esc key to exit the current menu or press the F10 key to exit
RBSU.
6. Restart the server.
When the server boots, the system identifies whether the current ROM bank is
corrupt. If a corrupt ROM is detected, the system boots from the backup ROM
and alerts you through POST that the ROM bank is corrupt.
Switching ROM images, in the event that RBSU is inaccessible, can also be
done by changing the switch settings on the system configuration switch. See
Appendix E, “LED Indicators, Switches and Jumpers,” for instructions.