Compaq ProLiant ML330 Generation 2

Compaq ProLiant ML330 G2 Service Overview 7
Rev. 1.0 Page 7 of 20
Internal Two-Bay Hot-Plug SCSI Drive
This is an option which is installed in the server's removable media bay area which will allow the
customer to add two additional hot-plug SCSI hard drives or a combination of one hot-plug SCSI
hard drive and one hot-plug SCSI tape drive.
LEDs
In addition to the system LEDs (on the front of the server) and network controller LEDs (on the
back of the server), the ML330 G2 now includes 15 diagnostic LEDs on the system board. These
LEDs indicate error conditions, such as processor, PPM, or memory module failures. Refer to the
graphic and table on the following pages to determine what these lights indicate.
For detailed information on the system and network controller LEDs, refer to Appendix E in the
Setup and Installation Guide. (See References at the end of this document.)