Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: k-appe LEDs & Switches.doc Last Saved On: 12/27/00 3:34 PM
Appendix E
LED Indicators, Switches, and Jumpers
This appendix provides specific troubleshooting information for the Compaq
ProLiant ML330e/ML330 server and is to be used to find details about server
startup problems, switch settings, LEDs, and more. For information about
general troubleshooting techniques, diagnostic tools, error messages, and
preventative maintenance, refer to the Compaq Servers Troubleshooting
Guide, also included in your user documentation.
When you add or remove a component or change a security feature, you must
reconfigure the server to recognize these changes. If the system configuration
is incorrect, your server may not work properly and you may receive error
messages on the screen. Setting the system board switches is part of the
reconfiguration process, along with running the BIOS Setup utility, for the
ProLiant ML330 server, or the ROM Based Setup Utility (RBSU), for the
ProLiant ML330e server.