Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

LED Indicators, Switches, and Jumpers E-11
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: k-appe LEDs & Switches.doc Last Saved On: 12/27/00 3:34 PM
Server Feature Board Switch
1
on
2345678
Figure E-5. Server Feature Board switch default settings
Table E-5
Server Feature Board Switch Settings
Position Default Function Description Settings
1 Off Enable
embedded
video.
Used to disable the onboard
video controller when an
optional video adapter is
installed.
Off = Embedded video is
enabled.
On = Embedded video is
disabled.
2OffReserved
3OffReserved
4OffReserved
5OffReserved
6OffReserved
7OffReserved
8OffReserved
Important: Positions 2 through 8 are reserved for Compaq authorized service providers only. Do not
change these switches from the indicated default settings.
NOTE: For information on troubleshooting video problems, refer to “Video Problems” in
the Compaq Servers Troubleshooting Guide.