Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

1-2 Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: b-ch1 Server Features.doc Last Saved On: 12/27/00 3:24 PM
Server features include:
■ Intel 256-KB Pentium III processor with 133-MHz front-side system
bus
■ 64 MB of PC133-MHz Registered, error checking and correcting
(ECC), synchronous dynamic random access memory (SDRAM)
DIMMs, upgradable to 2 GB. Models of the ProLiant ML330 server,
933 MHz and higher, come standard with 128 MB of PC133-MHz ECC,
SDRAM DIMMs.
■ Capacity for five 36-GB hard drives for a maximum of 180 GB of
internal storage (ProLiant ML330 server) or four 40-GB hard drives for
a maximum of 160 GB of internal storage (ProLiant ML330e server)
■ Four removable media bays (three available)
■ IDE CD-ROM drive
■ 1.44-MB, 3.5-inch diskette drive
■ Integrated single-channel Wide Ultra2 SCSI Controller
(ProLiant ML330 server) or an integrated dual-channel ATA/100
Controller (ProLiant ML330e server)
■ Integrated PCI 10/100 Wake on LAN NIC
■ Integrated ATI Rage XL Video Controller
■ Three available 32-bit PCI slots and two 64-bit PCI slots
■ CE Mark-compliant power supply
ML330
Figure 1-1. Compaq ProLiant ML330e/ML330 server