Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Index 17
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: m-index.doc Last Saved On: 12/27/00 3:36 PM
specifications F-1
dimensions F-1
humidity F-2
maximum wet bulb
temperature F-2
power supply output F-2
power, input requirements F-1
temperature F-2
weight F-1
static electricity See ESD
storage devices, removing and
replacing 3-7
supported operating systems D-7
SuSE Linux F-4
switches See also Server Feature
Board switch. See also reserved
processor switch. See also
system configuration switch
summary E-6
voltage selector, location 1-5,
2-4
symbols
used in text x
used on equipment xi
system board
battery, removing 3-28
components, identified 1-7
components, illustrated 1-6
system configuration switch (SW2)
CMOS, clearing E-8
CMOS, default settings E-7
default settings, illustrated E-7
defaults E-7
location 1-7
NVRAM, clearing E-8
NVRAM, default settings E-7
password protection E-7, E-8
ROMPaq disaster
recovery E-7, E-9
summary E-7
system IDs 5-4
system status LEDs
AC power E-4
hard drive status E-4
illustrated E-4
Power On/Standby E-4
summary E-3
T
tables
Diagnosis Steps D-4
Drive Bay Components and
Dimensions 1-3
Drive Bay Dimensions 3-7
Expansion Slots 3-20
Front Panel Components 1-4
Front Panel Power-On/Standy
LED Is Not On D-5
Internal ATA
Components 4-8
Internal SCSI
Components 4-2
Minimum Hardware
Configuration F-3
Network Controller LEDs E-5
Problems After Initial
Boot D-8
Processor Configuration Switch
(SW1) Settings E-10
ProLiant ML330e/ML330
Server Troubleshooting
Resources D-11
Rear Panel Connectors 1-5,
2-4
Server Does Not Have
Video D-6