Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Overview of Server Installation 2-9
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 12/27/00 3:25 PM
Configuring the Server
The server setup utilities can be used to configure the server and options.
■ To initiate the BIOS Setup utility for the ProLiant ML330 server, press
the F10 key when prompted during the startup process.
■ To initiate RBSU for the ProLiant ML330e server, press the F9 key
when prompted during the startup process.
The SmartStart and Support Software CD contains ROMPaq and updated
drivers, and assists with the operating system installation. To use the
SmartStart and Support Software CD:
1. Locate the SmartStart and Support Software CD in the Server Setup and
Management pack.
2. After you power up the server, press the CD-ROM drive eject button.
3. Insert the SmartStart and Support Software CD into the CD-ROM drive
with the labeled side up. Handle the CD by its edges, not by the flat
surfaces of the disc.
Figure 2-3. Inserting the CD into the CD-ROM drive
4. When the busy indicator turns green, the SmartStart sequence begins.
Refer to the SmartStart and Support Software CD for more information.