Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 12/27/00 3:26 PM
Chapter 3
Hardware Options Installation
This chapter provides procedures for installing, removing, and replacing
hardware options on the Compaq ProLiant ML330e/ML330 server.
CAUTION: Electrostatic discharge can damage electronic components. Be sure
that you are properly grounded before beginning any installation procedure.
NOTE: As a security measure on the ProLiant ML330 server, an intruder alert message (if
enabled) is displayed at startup if the front bezel has been unlatched. Refer to Chapter 5
“Server Configuration and Utilities” for information on enabling intruder alert.