Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide

Hardware Options Installation 3-11
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide Comments:
Part Number: 173868-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 12/27/00 3:26 PM
Removing a Hard Drive
To remove a 3.5-inch hard drive:
CAUTION: To prevent damage to equipment or loss of information, power down
the server, disconnect all cables from the back of the server, and disconnect the
power cord before removing the access panel.
1. Follow the steps in “Removing the Access Panel” earlier in this chapter.
2. Disconnect the power and data cables from the back of all devices in the
hard drive compartment.
Figure 3-10. Disconnecting the hard drive cables (ProLiant ML330 server)
Figure 3-11. Disconnecting the hard drive cables (ProLiant ML330e server)